Infusion Therapy Products for Safe & Effective Treatment
I.V. Catheter with Injection
Valve and Wings
Technical Specifications
Key Features
Equipped with a silicone-tipped, stainless-steel needle designed for smooth, precise penetration
Features a one-way silicone valve in the injection port to prevent backflow and ensure safe medication delivery
Uniquely designed with a recessed plug that covers the injection port, reducing contamination risks
Angled, grooved wings ensure secure fixation
Radio-opaque lines for accurate radiographic detection
Comes with a luer cap to seal the catheter when not in use, preserving sterility
6% luer taper for seamless compatibility with all standard medical devices
Disposable, sterile, and free from pyrogens, maintaining patient safety at all stages
Safety I. V. Catheter with
Injection Valve and Wings
Technical Specifications
Key Features
Advanced mechanism provides safety from needle stick injury
Passive, irreversible safety activation without altering the insertion technique
Stainless steel needle with a silicone tip for gentle, precise penetration
Injection port with one way silicone injection valve
Specially designed protection cap with a recessed plug to cover the injection port and minimize contamination
Angled and grooved wings for secure fixation
Radio-opaque lines allow clear detection on X-rays for precise placement
Comes with a luer cap to securely seal the catheter when not in use
6% luer taper fits all standard medical equipment
Designed to be disposable, sterile, and non-pyrogenic for maximum patient safety
I.V. Catheter with an integrated three-way stopcock
Technical Specifications
Key Features
Allows for the attachment of additional stopcocks, enabling multiple infusion therapies
Designed with color-coded taps for easy identification during procedures
Features flexible wings with suture holes for secure and stable fixation
Prevents contamination with reliable luer lock stoppers
360° rotation of the tap without limitation
Female luers with a 6% taper are compatible with all standard devices
Comes in sealed blister packaging, disposable, sterile, and free from pyrogens
Three-way stopcock
Technical Specifications
Key Features
Three way stopcock made of polycarbonate
Designed with multiple channels to support simultaneous infusion therapies
Engineered to withstand pressures up to 5 bars
Smooth 360° rotation with no restrictions for optimal handling
Rigorously stability-tested with both pneumatic and hydrostatic methods
Tap rotates every 360°, with flow shut-off every 90° for precise management
Minimal dead space in ports to ensure precise drug administration and maximum infusion flow. Continuous flow channels
Arrow indication marks on top to indicate direction of flow
Low profile for stable and safe positioning
Available in both lipid-resistant and non-lipid-resistant models
Clear Identification: Comes with blue and red pegs for easy identification
Sterile, non-pyrogenic, and sealed in blister packaging for single-use safety
Extension tubing with 3 way Stop cock
Technical Specifications
Key Features
Three-way stopcock with an integrated extension tubing for minimizing manipulation during intravenous administration of fluids/drugs through an I.V. Catheter
Minimizes chances of mechanical irritation and infection by taking the administration site away from insertion site
The integrated three-way stopcock offers multiple infusion lines
Smooth internal surface to minimize turbulence
Disposable, sterile and non-pyrogenic
Disposable Infusion set
Technical Specifications
Key Features
Designed for administering drugs and fluids from IV solution bags directly to IV catheters
Sharp spike enables smooth, easy insertion into solution bags
Roller clamp for regulating fluid flow rate
Kink resistant 150 cm long PVC tubing
Self sealing latex bulb for drug administration
Sterile, non-pyrogenic, and disposable for maximum hygiene
Available with a Y-injection site for added versatility in administration
Disposable Infusion set with
built Bacteria Barrier Air vent
Technical Specifications
Key Features
Designed with an airvent above the drip chamber to maintain ideal pressure for smooth, consistent fluid flow
The airvent includes a bacterial filter and snap cap to block airborne pathogens
Flexible chamber enables quick and easy fluid flow adjustments
Sleek, sharp spike with vents ensures easy penetration into IV solution bags
Molded latex bulb at the distal end allows for intermittent medication
Attached hypodermic needle with a male luer fitting prevents contamination
Made with soft, flexible tubing to prevent kinks and maintain fluid flow
Sterile, non-pyrogenic, and single-use for maximum hygiene
Available with an optional Y-injection site for versatile medication delivery
I.V. Infusion set with
Airvent and Y-Site
Technical Specifications
Key Features
Equipped with an airvent and bacterial filter above the drip chamber to maintain optimal pressure for a smooth, uninterrupted fluid flow
Large, transparent chamber allows for quick fluid adjustments
Features a sharp, sleek spike with vents for easy insertion into IV solution bags
Includes a Y-site at the distal end for convenient intermittent medication administration
Hypodermic needle attached to the male luer protects against contamination
Made from soft, kink-resistant tubing for reliable fluid delivery
Sterile, non-pyrogenic, and designed for single-use to ensure patient safety
I.V. Fluid Infusion Set with Flow Regulator
Technical Specifications
Key Features
Intravenous fluid infusion set with Flow Regulator to regulate the flow of IV fluid
Allows manual adjustment of IV fluid flow rates from 5 ml/hr to 300 ml/hr
Equipped with a sharp spike for easy insertion into IV solution bags
Features a roller clamp for accurate fluid flow rate adjustments
Designed for convenient drug administration
Sterile, non-pyrogenic, and intended for single-use to maintain hygiene standards
Blood Administration Set
Technical Specifications
Key Features
Specially designed for safe and efficient blood transfusion
Strong, sleek spike with an airvent for easy puncture of blood bag outlets
Includes a mesh filter within the drip chamber to prevent blood clots from entering the patient’s bloodstream
Regulator clamp for precise control over the transfusion rate
Made from soft, durable PVC to prevent kinks and maintain smooth flow
Convenient injection site for administering medications during transfusion
Available in single-drip and double-drip chamber models, with options for a latex bulb site or Y-injection site, and luer-slip or male-rotator variants
Disposable, sterile, and non-pyrogenic to ensure patient safety
Injection Stopper
Technical Specifications
Key Features
IV Cannula Block: Designed to seal IV cannulas when not in use
Integrated One-Way Valve: Features a built-in one-way valve within the stopper, enabling drug administration without the need to unscrew it
Variety Options: Available in both latex and latex-free versions to accommodate different needs
Single Lumen Central Venous Catheter (Seldinger technique)
Technical Specifications
Key Features
Centrally Inserted Single Lumen Central Venous Catheter: Designed for administering hyperosmolar solutions, measuring central venous pressure (CVP), performing haemodialysis, plasmapheresis, and facilitating rapid fluid infusion, among other applications
Provides the benefit of polyurethane catheter which is soft, kink resistant, extremely biocompatible with excellent wear properties and elastic memory
Kink resistant J-tip nitinol guide wire
Double Lumen Central Venous Catheter (Seldinger technique)
Technical Specifications
Key Features
Centrally inserted and ideal for administering hyperosmolar solutions, CVP monitoring, haemodialysis, plasmapheresis, and rapid fluid infusion, among other applications
Made from soft, kink-resistant polyurethane, offering excellent biocompatibility, durability, and elastic memory
Provides the benefit of polyurethane catheter which is soft, kink resistant, extremely biocompatible with excellent wear properties and elastic memory.
Two separate non-communicating vascular access lumens within a single catheter body.
Proximal lumen for blood sampling, medications and blood administration.
Distal lumen for CVP monitoring, blood administration and medication.
Reduces the necessity for multiple venipunctures.
Exit ports of individual lumens are separated by appropriate distance in proportion to the catheter’s French size.
Coaxial catheter design maximizes inner diameter of central lumen for high flow capacity.
en for high flow capacity. • D
Triple Lumen Central Venous Catheter (Seldinger technique)
Technical Specifications
Key Features
For administration of hyperosmolar solutions, measuring CVP, haemodialysis, plasmapheresis, rapid infusion of fluid among other uses
Provides the benefit of polyurethane catheter which is soft, kink resistant, extremely biocompatible with excellent wear properties and elastic memory
Three separate non-communicating vascular access lumens within a single catheter body
Proximal lumen for blood sampling, medications and blood administration
Distal lumen for CVP monitoring, blood administration, medications.
Medial lumen exclusively for total parenteral nutrition.
Reduces the necessity for multiple venipunctures.
Exit ports of individual lumens are separated by appropriate distance in proportion to the catheter’s French size.
Coaxial catheter design maximizes inner diameter of central lumen for high flow capacity.
Disposable, sterile and non-pyrogenic & Sealed blister packing.
